English
TranslateSLogic Combo 8
2023-07-26
Update history
| Date | Version | Author | Update content |
|---|---|---|---|
| 2023-07-26 | v0.1 | ctx |
|
Introduction
SLogic Combo 8 is a development tool with functions of logic analyzer, CKLink debugger, DAP-Link debugger and USB2UART, which can be switched arbitrarily by buttons.
Function Parameters
SLogic Function Parameters
| Logic Analyzer | SLogic Combo 8 |
|---|---|
| Maximum Channel Number | 8CH |
| Maximum Sampling Rate | 80M |
| Transmission Bandwidth | 320Mb/s |
| Sampling Mode | Stream |
| Typical Configuration | 80M@4CH 40M@8CH |
| Signal Input Range | 0～3.6V |
| High and Low Level Thresholds | VIH>2V VIL<0.8V |
In Windows environment, the SLogic Combo 8 has maximum transmission bandwidth of 160 Mb/s. The typical configuration includes 80M@2CH and 40M@4CH.
CKLink Function Parameters
| CKLink | SLogic Combo 8 |
|---|---|
| JTAG Clock Rate | 16M |
| Typical Dump Speed | 1200KB/s |
| Debug Serial Port | Up to 20Mbps |
DAPLink Function Parameters
| DAPLink | SLogic Combo 8 |
|---|---|
| Debug Serial Port | Up to 20Mbps |
| Typical Burning Speed | 110KB/s |
UART Function Parameters
| High Speed Four Serial Ports | SLogic Combo 8 |
|---|---|
| Maximum Baud Rate | 2x20Mbps+2x1Mbps |
| Total Bandwidth | 42Mbps |
Get Started Now
Click the link below to enter the corresponding chapter:
Basic Operation
Using as Logic Analyzer
Using as CKLink
Using as DAPLink
Using as Serial Module
Update firmware
Others Links
Support Email：support@sipeed.com
