Install on Windows
Edit on 2022.05.17
We can download TD install-package and get its license from Download station.
This may take a really long time to download.
But we need it to development tang primer
Double click the Install-package to install this software, and rename the license file Anlogic_20220703.lic as Anlogic.lic, then move the license file to the TD5.0.27252\license folder in the installed path.
Note：license is valid before 2022.07.03 after when we don't support anymore
Then we can use TD
Install the USB serial port
Connect Tang Primer with computer and open device manager to see device information.
It may be named WinUsb Device or USB-JTAG-Cable duo to different Windows verison.
Make sure USB VID:PID is 0547:1002
- Windows7 without installing driver
- Windows10 without installing driver
Install driver on windows7
Double WinUsb Device and choose 更新驱动程序(P)
Select the driver directory where the TD installed. Click 确定 to install the driver.
After succeed installing,we can see this in device manager
Install driver on windows10
Before installing the driver itself, make sure you disable driver signature enforcement first, otherwise Windows 10 won’t allow you to install the unsigned driver from Anlogic.
Double click on USB-JTAG-Cable to select update driver
Browse the folder and select the driver\win8_10_64 directory under the TD installation directory. Click OK. Then click on Let me pick from a list of available drivers on my computer.
Click on Have Disk..., then select the directory you selected in the last step, then click OK.
The installation is successful and can be seen in the device manager.
Check if device detected by Tang Dynasty IDE
Click on Download button as shown in following image.
Plugin Tang Primer into your computer and click Refresh buttion on Download Dialog box.
Congratulations, you have setup the TD driver on Windows.