Tang Nano

Edit on 2022.03.23

Introduction

Tang Nano is a core board designed based on Gowin GW1N-1 FPGA chip.The board is equipped with PSRAM, RGB LCD interface and onboard USG-JTAG debugger, which make it convinent for users to use.

Parameters

Nano
Note :

  • The Numeric number matches PIN number
  • Numeric number with dot matches gclk pins
Items Parameters
Core GW1N-1 FPGA
Logic units(LUT4) 1152
Registers(FF) 864
Block SRAM(bits) 72K
B-SRAM block 4
User flash(bits) 96K
PLL 1
I/O Bank 4
I/O numbers 41
Core quantity 1.2V
Usb-Jtag ch552
Onboard PSRAM 64Mbits

Nano-Pin

Support

Email to support@sipeed.com for technical support and Business cooperation.

Resources