SPMOD - Ethernet
2024-07-25
Overview
SPMOD_Ethernet(Ethernet module) uses W5500 chip.
SPMOD - Ethernet Introduction
- Using Sipeed-SPMOD interface(2.54mm * 8PIN ),unified MaixPy board interface
- Connect to the board through the SP-MOD SPI interface
- Master chip:The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller
- The theoretical SPI design speed is 80MHz
- 10BaseT/100BaseTX Ethernet PHY embedded, Supports Auto Negotiation (Full and half duplex, 10 and 100-based )
- Size:35.76*19.74*8.7mm
W5500 chip Introduction
Features: | --- |
---|---|
Supply voltage of external power supply | 2.97V~3.63V |
Supply current of external power supply | <132mA |
Range of working temperature | -40℃~85℃ |
Sleep Status of Current | <15mA |
SPI Clock | The theoretical design speed is 80MHz |
TCP/IP protocol | Support TCP,UDP,ICMP,IPv4,ARP,IGMP,PPPoE protocols |
- Supports 8 independent sockets simultaneously
,Internal 32Kbytes Memory for TX/RX Buffers
,Supports Wake on LAN over UDP
,10BaseT/100BaseTX Ethernet PHY embedded
,Support Auto Negotiation (Full and half duplex, 10 and 100-based )
,Not support auto-MDIX feature
SPMOD_Ethernet pin description:
Pin | Name | Type | Description |
---|---|---|---|
1 | GND | G | Ground |
2 | CS | I | Chip Select input pin |
3 | SO | I/0 | Master In Slave Out |
4 | NC | NC | Not connected |
5 | 3V3 | V | Power supply(3.3V) |
6 | SCK | I | SPI clock pin |
7 | SI | I/0 | Master Out Slave In |
8 | NC | NC | Not connected |
Usage
- 待更新
Outlook
- SPMOD_Ethernet Size drawing:
Resource Link
Resource | --- |
---|---|
Website | www.sipeed.com |
Github | https://github.com/sipeed |
BBS | http://bbs.sipeed.com |
Wiki | http://maixpy.sipeed.com |
Sipeed model shop | https://maixhub.com/ |
SDK Relevant information | dl.sipeed.com/MAIX/SDK |
HDK Relevant information | dl.sipeed.com/MAIX/HDK |
E-mail(Technical Support and Business Cooperation) | support@sipeed.com |
telegram link | https://t.me/sipeed |