K210 core module

There are four AIOT modules developed based on K210: M1, M1w, M1n, MF0

  • Feature description:

These four modules are based on Canaan Kanzhi Technology's edge intelligent computing chip K210 (RISC-V architecture). The main control chip has a built-in 64-bit dual-core high-performance low-power processor, each core has a floating-point unit (FPU), a convolutional artificial neural network intelligent hardware accelerator (KPU) and a fast Fourier transform accelerator (FFT) , Equipped with Field Programmable IO Array (FPIOA), supports a variety of mainstream AI programming frameworks.

Maix AIOT module difference comparison

M1 M1w M1n MF0
Exterior M1 module M1W module M1n module MF0 module
size 25.4x25.4x3.3(mm) 25.4x25.4x3.3(mm) 25.0x22.0x2.7(mm) 20.0x20.0x4.5(mm)
Voltage output (provided to the bottom board) 1.8V and 3.3V 1.8V and 3.3V 1.8V and 3.3V 3.3V
Maximum power consumption (non-transient) 1.5W 3W 1.5W 1.5W
WIFI None K210 and ESP8285 are connected through SPI interface and serial port None None
Onboard camera connector None None Yes (only compatible with single camera) Yes (only compatible with single camera)
Pin form Stamp hole Stamp hole NGFF B-KEY 2.54mm pitch through pad + SMD pad
camera signal All leads All leads All leads None
screen signal All leads All leads All leads None
Lead out ordinary IO port Quantity 48 (all lead out) Quantity 48 (all lead out) 44 (not drawn by IO0-3) 9

Module pin definition

Specific downloadable specifications

M1/M1w: https://dl.sipeed.com/MAIX/HDK/Sipeed-M1&M1W/Specifications

M1n: https://dl.sipeed.com/MAIX/HDK/Sipeed-M1n

MF0: https://dl.sipeed.com/MAIX/HDK/Sipeed-MF0/MF0-2802