SPMOD - Extender

Overview

SPMOD_Extender(8PIN SP-MOD Expander)

SPMOD - Extender Introduction

  • Using Sipeed-SPMOD interface(2.54mm * 8PIN ),unified MaixPy board interface
  • Using SP-Extender to divide SP-MOD into four interface,including three Two-wire SP-MOD interface and a Four-wire SP-MOD interface
  • Size:35.0*20.0*1.6mm

Introduction

Features: ---
Two-wire SP-MOD interface*3 Connect to the D0 and D1 on the SP-MOD,Used as UART interface (Connect at most one device)

or I2C interface(Connect at most three device) , can also be used as two independent GPIO |
| Four-wire SP-MOD interface | Connect to the D2-D5 on the SP-MOD,Uusually used as SPI interface,
can also be used as four independent GPIO |
| Supply voltage of external power supply | Depends on connected modules |
| Supply current of external power supply | Depends on the working conditions of the module, usually less than 1000mA |
| Range of working temperature | -40℃ ~ 85℃ |

Outlook

  • SPMOD_Extender Size drawing:

Resource ---
Website www.sipeed.com
Github https://github.com/sipeed
BBS http://bbs.sipeed.com
Wiki http://maixpy.sipeed.com
Sipeed model shop https://maixhub.com/
SDK Relevant information dl.sipeed.com/MAIX/SDK
HDK Relevant information dl.sipeed.com/MAIX/HDK
E-mail(Technical Support and Business Cooperation) Support@sipeed.com
telgram link https://t.me/sipeed