Install TD driver on Linux

Check for default linux driver

Insert Tang Primer into your computer and execute lsusb to see the information. Make sure USB VID:PID is 0547:1002 as shown in image below.

Create a new udev rule file

Set udev rules to enable Tang Primer to be accessed by the plugdev group

Execute the following command in terminal to create a new udev rules file.

sudo nano /etc/udev/rules.d/91-anlogic-jtag.rules

Copy the following code into text editor and save it, as shown in following image.

SUBSYSTEMS=="usb", ATTRS{idVendor}=="0547", ATTRS{idProduct}=="1002", \
  GROUP="plugdev", \
  MODE="0660"

Execute the following command in terminal to restart the udev service.

sudo service udev restart

Check if device detected by Tang Dynasty IDE

Go to <TD installation directory>/bin/ and execute the following command to open TD IDE in GUI mode.

./td -gui

Click on Download buttion as shown in following image.

Plugin Tang Primer into your computer and hit Refresh buttion on Download Dialog box.

Due to some unknown bug, JTAG only works with 400kbps or lower speed.

Congratulations, you have setup the TD driver on Linux.