K210 core module

    There are four AIOT modules developed based on K210: M1, M1w, M1n, MF0

    • Feature description:

    These four modules are based on Canaan Kanzhi Technology's edge intelligent computing chip K210 (RISC-V architecture). The main control chip has a built-in 64-bit dual-core high-performance low-power processor, each core has a floating-point unit (FPU), a convolutional artificial neural network intelligent hardware accelerator (KPU) and a fast Fourier transform accelerator (FFT) , Equipped with Field Programmable IO Array (FPIOA), supports a variety of mainstream AI programming frameworks.

    Maix AIOT module difference comparison

    M1 M1w M1n MF0
    Exterior M1 module M1W module M1n module MF0 module
    size 25.4x25.4x3.3(mm) 25.4x25.4x3.3(mm) 25.0x22.0x2.7(mm) 20.0x20.0x4.5(mm)
    Voltage output (provided to the bottom board) 1.8V and 3.3V 1.8V and 3.3V 1.8V and 3.3V 3.3V
    Maximum power consumption (non-transient) 1.5W 3W 1.5W 1.5W
    WIFI None K210 and ESP8285 are connected through SPI interface and serial port None None
    Onboard camera connector None None Yes (only compatible with single camera) Yes (only compatible with single camera)
    Pin form Stamp hole Stamp hole NGFF B-KEY 2.54mm pitch through pad + SMD pad
    camera signal All leads All leads All leads None
    screen signal All leads All leads All leads None
    Lead out ordinary IO port Quantity 48 (all lead out) Quantity 48 (all lead out) 44 (not drawn by IO0-3) 9

    Module pin definition

    Specific downloadable specifications

    M1/M1w: https://dl.sipeed.com/MAIX/HDK/Sipeed-M1&M1W/Specifications

    M1n: https://dl.sipeed.com/MAIX/HDK/Sipeed-M1n

    MF0: https://dl.sipeed.com/MAIX/HDK/Sipeed-MF0/MF0-2802