"Install TD driver on Windows"

Check for default windows driver

Insert Tang Primer into your computer and open Device Manager to see the information. It may be named WinUsb Device or USB-JTAG-Cable depending on the Windows version. Make sure USB VID:PID is 0547:1002.

device manager

device manager win10

Install drivers (Windows 7)

Double click on WinUsb Device to select update driver

update driver 1

update driver 2

Browse the folder and select the driver directory under the TD installation directory. Click OK to start the installation.

Choose driver folder

The installation is successful and can be seen in the device manager.

Install success

Install drivers (Windows 10)

Before installing the driver itself, make sure you disable driver signature enforcement first, otherwise Windows 10 won't allow you to install the unsigned driver from Anlogic.

Double click on USB-JTAG-Cable to select update driver.

update driver 1

update driver 2

Browse the folder and select the driver\win8_10_64 directory under the TD installation directory. Click OK. Then click on Let me pick from a list of available drivers on my computer.

Choose driver folder

Click on Have Disk..., then select the directory you selected in the last step, then click OK.

Install from disk

Now select the Anlogic usb cable v0.1 in the driver list and click Next to start the installation.

Select driver

The installation is successful and can be seen in the device manager.

Install success

Check if device detected by Tang Dynasty IDE

Click on Download button as shown in following image.

TD GUI Mode

Plugin Tang Primer into your computer and hit Refresh buttion on Download Dialog box.

TD Download Dialog

Congratulations, you have setup the TD driver on Windows.